Trav-L-Cutter - SFI Orbimax
Trav-L-Cutter - SFI Orbimax
Trav L Cutter portable milling machine

Trav L Cutter portable milling machine

Trav-L-Cutter is a portable milling machine designed to cut and bevel simultaneously on most pipe materials and schedules. Secured by its tensioning chain, the Trav-L-Cutter drives itself around the pipe as it machines, producing a weld ready surface.

    • Simultaneous Cutting & Beveling
    • Horizontal and Vertical Operation
    • Preferred Cold Cutting Method
    • Compact, Portable Design
    • Pneumatic or Hydraulic Drive
    • Easy to Set-Up and Operate
    • Fast and Accurate Cuts
    • Accommodates 6"–72" OD (DN150–1800)

      Product Specifications

      ITEM SPECIFICATION
      Machining Capacity 6"–72" (153 to 1829mm) pipe, large diameter vessels.
      Cutter Drive

      Pneumatic: 4 hp governed air motor coupled with worm gearbox.

      Hydraulic: As above, with hydraulic motor

      Cutter Speed

      Pneumatic: Adjustable from 35–55 rpm for use on work-hardened alloys.

      Hydraulic: Adjustable from 0–60 rpm

      Feed

      Pneumatic: 3/4 hp air motor coupled through overload clutch, gearbox and chain reduction to final machine drive sprocket.

      Hydraulic: 4 hp hydraulic motor

      Feed Method Positive, nonslip chain drive.
      Air Requirements 100 cfm @ 90 psi (.05 m3 /s @ 6.21 bar)
      Hydraulic Requirements 13–15 gpm @ 1500 psi (49.2–56.78 lpm @ 103.42 bar) not to exceed 2000 psi (137.9 bar)
      Work Speed 3" (76.2mm) surface feed/min maximum, or appr. 1 min/in (1 min/25.4mm) of pipe diameter. 10" (254mm) pipe = 10 min. Over 1 /2" (12.7mm) wall as well as most alloys require reduced feed rate.
      Clearance 10"-12" (254–309mm) radial, 20" (508mm) axial
      Controls (Model E & HE) Cutter on-off, feed on-off, with interlock to prevent machine feed unless cutter is turning, adjustable feed control. (Model HE Only) Flow control valves. Separate controls provide adjustable spindle speed and cutter speed. Forward/Reverse valve governs machine travel direction.
      Weight: Operating 215 lbs (97.6 kg) Shipping: 418 lbs (189.6 kg)
      Finish Powder coated enamel
      Dimensions (LxWxH) 24"(610 mm) x 20"(510 mm) x 10.75"(280 mm)

       

      Sizing

      US PIPE SIZE METRIC PIPE SIZE POWER SOURCE
      6" to 72" OD DN150-1800 Hydraulic
      6" to 72" OD DN150-1800 Pneumatic

      Description

      Trav-L-Cutter is a portable milling machine designed to cut and bevel simultaneously on most pipe materials and schedules. Secured by its tensioning chain, the Trav-L-Cutter drives itself around the pipe as it machines, producing a weld ready surface.

        Features

        • Simultaneous Cutting & Beveling
        • Horizontal and Vertical Operation
        • Preferred Cold Cutting Method
        • Compact, Portable Design
        • Pneumatic or Hydraulic Drive
        • Easy to Set-Up and Operate
        • Fast and Accurate Cuts
        • Accommodates 6"–72" OD (DN150–1800)

          Specifications

          Product Specifications

          ITEM SPECIFICATION
          Machining Capacity 6"–72" (153 to 1829mm) pipe, large diameter vessels.
          Cutter Drive

          Pneumatic: 4 hp governed air motor coupled with worm gearbox.

          Hydraulic: As above, with hydraulic motor

          Cutter Speed

          Pneumatic: Adjustable from 35–55 rpm for use on work-hardened alloys.

          Hydraulic: Adjustable from 0–60 rpm

          Feed

          Pneumatic: 3/4 hp air motor coupled through overload clutch, gearbox and chain reduction to final machine drive sprocket.

          Hydraulic: 4 hp hydraulic motor

          Feed Method Positive, nonslip chain drive.
          Air Requirements 100 cfm @ 90 psi (.05 m3 /s @ 6.21 bar)
          Hydraulic Requirements 13–15 gpm @ 1500 psi (49.2–56.78 lpm @ 103.42 bar) not to exceed 2000 psi (137.9 bar)
          Work Speed 3" (76.2mm) surface feed/min maximum, or appr. 1 min/in (1 min/25.4mm) of pipe diameter. 10" (254mm) pipe = 10 min. Over 1 /2" (12.7mm) wall as well as most alloys require reduced feed rate.
          Clearance 10"-12" (254–309mm) radial, 20" (508mm) axial
          Controls (Model E & HE) Cutter on-off, feed on-off, with interlock to prevent machine feed unless cutter is turning, adjustable feed control. (Model HE Only) Flow control valves. Separate controls provide adjustable spindle speed and cutter speed. Forward/Reverse valve governs machine travel direction.
          Weight: Operating 215 lbs (97.6 kg) Shipping: 418 lbs (189.6 kg)
          Finish Powder coated enamel
          Dimensions (LxWxH) 24"(610 mm) x 20"(510 mm) x 10.75"(280 mm)

           

          Sizing

          US PIPE SIZE METRIC PIPE SIZE POWER SOURCE
          6" to 72" OD DN150-1800 Hydraulic
          6" to 72" OD DN150-1800 Pneumatic

          Downloads