Straight Head Hydraulic Nut Splitter

Cuts Nuts 11/16” to 6-1/8” across the flats.

  • Cuts through the hardest of nuts -- quickly & safely
  • Cuts more nut sizes per models than competitors
  • Precision, re-sharpenable chisel cuts only the nut
  • Perform dozens of cuts before chisel needs sharpening
  • Double-cutting & Angle Head models also available

     diagram

    Fast To remove a 3-1/2” nut with a torch or hammer and chisel might take up to 20 minutes. But you only need 20-30 seconds with AutoSplitter. Fast set-up too. AutoSPLITTER goes from the toolbox to in-use in less than five minutes
    Safe No hammers, No impact. Operator has hands off during operation. No flames. No risk to volatile environments. No hot work permits required. AutoSPLITTER cuts smoothly so that there is no danger to the operator or the surrounding equipment
    Quiet All you’ll hear is the hum of the hydraulic pump and a reassuring “snap” when the nut is cut. With AutoSplitter, there’s no noise pollution or risk of noise-related injury
    Precise You can easily calibrate the cutting chisel so only the nut is cut, with no damage to the bolt or stud threads
    Versatile AutoSplitter cuts through even the hardest nuts, including 2H (ASTMA 194/2H {Brinell hardness 248-352}). And each model of AutoSplitter can be used for a wide range of inch or metric nut sizes (see charts)
    Money Saving Nut removal takes less time, so downtime is reduced. And with AutoSplitter, you can avoid costly damage to bolts, studs and surrounding equipment
    Straight Head Hydraulic Nut Splitter

    Description

    Cuts Nuts 11/16” to 6-1/8” across the flats.

    • Cuts through the hardest of nuts -- quickly & safely
    • Cuts more nut sizes per models than competitors
    • Precision, re-sharpenable chisel cuts only the nut
    • Perform dozens of cuts before chisel needs sharpening
    • Double-cutting & Angle Head models also available

      Features

       diagram

      Kits

      Fast To remove a 3-1/2” nut with a torch or hammer and chisel might take up to 20 minutes. But you only need 20-30 seconds with AutoSplitter. Fast set-up too. AutoSPLITTER goes from the toolbox to in-use in less than five minutes
      Safe No hammers, No impact. Operator has hands off during operation. No flames. No risk to volatile environments. No hot work permits required. AutoSPLITTER cuts smoothly so that there is no danger to the operator or the surrounding equipment
      Quiet All you’ll hear is the hum of the hydraulic pump and a reassuring “snap” when the nut is cut. With AutoSplitter, there’s no noise pollution or risk of noise-related injury
      Precise You can easily calibrate the cutting chisel so only the nut is cut, with no damage to the bolt or stud threads
      Versatile AutoSplitter cuts through even the hardest nuts, including 2H (ASTMA 194/2H {Brinell hardness 248-352}). And each model of AutoSplitter can be used for a wide range of inch or metric nut sizes (see charts)
      Money Saving Nut removal takes less time, so downtime is reduced. And with AutoSplitter, you can avoid costly damage to bolts, studs and surrounding equipment

      Specifications

      Straight Head Hydraulic Nut Splitter

      Downloads