FREE CALL 1800 734 000
Carbide Burrs - Cylindrical Burr Ball Nose - SFI Orbimax

Carbide Burrs - Cylindrical Burr Ball Nose

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

  • Alpha - Made in USA
  • Cylindrical Ball Nosed All sizes are nominal.
  • Sizes marked: 3mm shank, all others are 6mm shank.
  • Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 -   Chipbreaker Chipbreaker fast stock removal for improved      control and reduced chips for use on hard materials,  i.e. steel alloy 50RC, 60RC, carbon and cast iron

    Description: 

    Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

    Features: 

    • Alpha - Made in USA
    • Cylindrical Ball Nosed All sizes are nominal.
    • Sizes marked: 3mm shank, all others are 6mm shank.
    • Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 -   Chipbreaker Chipbreaker fast stock removal for improved      control and reduced chips for use on hard materials,  i.e. steel alloy 50RC, 60RC, carbon and cast iron

      Downloads

      Spin to win Spinner icon